Installing update 1702 for System Center Configuration Manager

In this post we will look at the steps for installing update 1702 for system center configuration manager. Believe me the update 1702 brings lot of new features and improvements over previous update. In a separate post we will see what’s new in ConfigMgr update 1702. Also we will look at the requirements for installing update 1702 in a separate post. If you are looking for Configuration Manager Build numbers, here is a link.

The new 1702 Update should be available in the Configuration Manager Console under Administration > Overview > Cloud Services > Updates and Servicing. If you don’t find the update yet, don’t panic. You may need to try “Check for Updates” more than once if the package is not downloaded on the first try.

Note that the update is rolled out globally to all the customers. In case you want to get the update quickly, run the powershell script listed here.

Installing update 1702 for System Center Configuration Manager

Installing update 1702 for System Center Configuration Manager

Let’s see the steps to install update 1702 for system center configuration manager. Click Check for updates and wait until you see Configuration Manager 1702 update in downloading state.

Installing update 1702 for System Center Configuration Manager

Check the dmpdownloader.log file to monitor the download process. The downloading of update may take significant amount of time based on your internet connectivity speed.

Installing update 1702 for System Center Configuration Manager

Once the update is downloaded, the state of update 1702 is changed to Available. This means you are good to install the update. Right click the update 1702 and click Install Update Pack. As I mentioned earlier, I am installing this update on my lab setup, I am skipping the Run prerequisite check step. If you are installing this update in production, it is always recommended to run prerequisite check step first.

Installing update 1702 for System Center Configuration Manager

You will now see Configuration Manager 1702 wizard. Click Next.

Installing update 1702 for System Center Configuration Manager

As mentioned earlier, SCCM update 1702 comes with lot’s of new features. You can enable the features by ticking them or you could enable it later as well. For now I will not select any features and click Next.

Installing update 1702 for System Center Configuration Manager

Choose Upgrade without validating and click Next.

Installing update 1702 for System Center Configuration Manager

Complete the remaining steps by clicking Next and finally click Close.

Installing update 1702 for System Center Configuration Manager

Using CM trace log tool, open the CMUpdate.log file. You will see content downloaded to your <ConfigMgrInstallDir>\CMUStaging directory.

Installing update 1702 for System Center Configuration Manager

To view the Configmgr update 1702 installation status, go to Monitoring > Overview > Updates and Servicing Status. Right click update 1702 and click Show Status.

Installing update 1702 for System Center Configuration Manager

Finally the update 1702 is installed successfully. Post this step you will also see the console is also updated.

Installing update 1702 for System Center Configuration Manager

Let’s check the site version and console version post update 1702. If you have updated your configuration manager to 1702, the site version is 5.0.8498.1000 and console version is 5.00.8498.1500.

Installing update 1702 for System Center Configuration Manager

Related Posts

16
Leave a Reply

avatar
12 Comment threads
4 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
newest oldest most voted
Nick V
Guest
Nick V

Question on 1606-1702 prerequisite check. We have one site server and a handful of distribution points that we only use for software deployment yet the prerequisite check comes back with an warning on unsupported OS [Completed with warning]:Starting with version 1702, Configuration Manager does not support Windows Server 2008 R2 operating system. https://go.microsoft.com/fwlink/?linkid=841654. This check verifies that the site system operating system meets the minimum requirement of Windows Server 2012 for site system installation. Right below that warning though is the same line listed as OK. Is the warning just that, a general warning, or did it actually find something… Read more »

Bjoern Rodemund
Guest
Bjoern Rodemund

Hi, I am trying to update from 1606 to 1702. I ran the Pre-Req check manually, since it tended to get stuck from in console. Now the Update is in “Installing” State since 2 days and is not showing up in Monitoring at all. Anyone encountered this as well? Thanks in advance!

Joachim Doerflinger
Guest
Joachim Doerflinger

Please Help, I am in Big Trouble with my Customer.
I upgraded my Primary Site to 1702 successfull. Then I choosed “Upgrade” for my Secondary Sites. The Prereqcheck on all Secondary Sites completed successfully but the Upgrade itself never startded on the Secondary Site. They all show Upgrade but nothing happens since more than a week. Thanks in Advance for Help.
[email protected]

Saulės Kolektorius
Guest
Saulės Kolektorius

Hi, In my SCCM (v.1610) is changed hardware inventory classes by this manual: https://www.systemcenterdudes.com/win32_tpm-class-in-hardware-inventory-is-missing-data-by-default-in-configuration-manager-2012/ When I updating to version 1702 process finised with error: INFO: Site Component Manager installation completed. CONFIGURATION_MANAGER_UPDATE 2017-05-23 16:12:39 1308 (0x051C) INFO: SQL Connection succeeded. Connection: SMS ACCESS, Type: Secure CONFIGURATION_MANAGER_UPDATE 2017-05-23 16:12:39 1308 (0x051C) Turned on activation for service broker queue CONFIGURATION_MANAGER_UPDATE 2017-05-23 16:12:39 1308 (0x051C) Failed to apply update changes 0x87d20b15 CONFIGURATION_MANAGER_UPDATE 2017-05-23 16:12:39 1308 (0x051C) Waiting for changes to the “\sccm.serverSMS_VK1inboxescmupdate.box” directories, updates will be polled in 600 seconds… CONFIGURATION_MANAGER_UPDATE 2017-05-23 16:12:39 1308 (0x051C) There are no pending update package to be processed.… Read more »

Aussupport
Guest
Aussupport

HI,

My Prerequisite test failed and now Installation is in progress

but it is stuck i cannot re image any pc’s?

comment image

joshgeorge
Guest
joshgeorge

Mine has been stuck on the “installing” state for over 3 days now.

Emulatronic
Guest
Emulatronic

After installing 1702, in Software Library/Windows 10 Servicing, I still see Windows 10 Creators Update Computers (1703) as Others. Is that normal?

Nikkio975
Guest
Nikkio975

Good day First of all: great site! I like your work! Then, i’m gioing to explain an issue with the update Right now we’re on CM 1610 (latest patches). No proxy, VM environment, directly connected to Internet (firewalled but all needed ports opened) The Update is in “downloading” status. In the main window “Update Pack Installation Status” – green flags near – Process update package – Download update package cab files – Extract update package payload Troubleshooting steps (unsuccesfully): -Disabled AV (Deep Security) – No luck -Uninstalled AV (Deep Seciruty) – No luck -Disabled FW Probes (vlan between SRV and… Read more »

Fahid Shaheen
Guest
Fahid Shaheen

Hi Prajwal, great post always.

What would be the correct upgrade path from 2012 R2 (no SP1) to SCCM 1702?

Cheers.

Gerald Mathieu
Guest
Gerald Mathieu

Did you tested an Insider ADK with SCCM1702?

I’m trying to update the Boot Images (15052 or 15063) but, even if SCCM accept to import them, they seems broken (Missing tabs in Properties). If I try to import a 14393 winpe.wim, it works, even when using the Insider ADK.
comment image
comment image

Emulatronic
Guest
Emulatronic

The update is still not showing and I have run the script… 🙁

Health Attestation is giving errors and I’d like to see if it will fix it

UPDATE: It just showed…

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More